Tizonia in WSL 1 and WSL 2 (ArchWSL)
Windows 10 WSL 1 and 2
Tested on WSL V1:
ver
Microsoft Windows [Version 10.0.18363.815] (WSL V1)
Working...
Tested on WSL V2:
ver
Microsoft Windows [Version 10.0.18941.1001]
Working...
WSL V2 requires the Virtual Machine Platform
Start ->Turn Windows features on or off -> Check Virtual Machine Platform
Convert your ArchWSL build by typing this command in the regular Windows Command Prompt window (Not ArchWSL console window):
wsl -l -v
NAME STATE VERSION
* Arch Running 1
wsl --set-version arch 2
Conversion in progress, this may take a few minutes...
For information on key differences with WSL 2 please visit https://aka.ms/wsl2
Conversion complete.
Note: You can go back by changing 2 to a 1 again with the same command.
wsl -l -v
NAME STATE VERSION
* Arch Running 2
or make it the default so all builds use WSL2:
wsl --set-default-version 2
How to check your WSL Version ( Blurb from here with edits below: https://askubuntu.com/questions/1177729/wsl-am-i-running-version-1-or-version-2 )
At a Windows Command Prompt, run ver. Is the next-to-last numeric group version 18917 or higher? If so, go on to step 2. If not, you have version 1. This illustrates the result when the OS is Build 16299:
Version 16299
Open Windows PowerShell or CMD and enter the command wsl -l -v
wsl help info will show.
If version 2 is installed properly, you will see the version number.
wsl -l -v
NAME STATE VERSION
* Arch Running 2
If you don't see a version number, or if you see an error message (Thank you, Cornea Valentin) you have version 1. Uninstall it then reinstall it as per https://scotch.io/bar-talk/trying-the-new-wsl-2-its-fast-windows-subsystem-for-linux
Why is this relevant?
WSL 1 was based on Microsoft's Linux-compatible kernel interface, a compatibility translation layer with no Linux kernel code.
WSL 2 was redesigned with a Linux kernel running in a lightweight VM environment, and innovators have found many more things they can do with WSL 2.
Installing WSL
A requirement for Version 1 and 2:
Start ->Turn Windows features on or off -> Check Windows Subsystem for Linux
A requirement for Version 2:
Start ->Turn Windows features on or off -> Check Virtual Machine Platform
If you see any network UAC warnings in Windows make sure to accept them during this process… otherwise… you know… no network… (Cortana Joke)
Make a folder on C:\
mkdir C:\WSL
This is where we are going to put our ArchWSL build.
Install ArchWSL
https://github.com/yuk7/ArchWSL/releases
https://github.com/yuk7/ArchWSL/releases/download/20.4.3.0/Arch.zip
Extract Arch.zip -> C:\WSL\Arch\
Run
C:\WSL\Arch\Arch.exe
Install Windows Pulse Audio
https://www.freedesktop.org/wiki/Software/PulseAudio/Ports/Windows/Support/
http://bosmans.ch/pulseaudio/pulseaudio-1.1.zip
Extract pulseaudio-1.1.zip to C:\WSL\pulseaudio
Edit
C:\WSL\pulseaudio\etc\pulse\default.pa
Change line 61 to:
WSL V1
load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1 auth-anonymous=1
WSL V2
load-module module-native-protocol-tcp auth-ip-acl=172.16.0.0/12 auth-anonymous=1
Edit
C:\WSL\pulseaudio\etc\pulse\daemon.conf
Change line 39 to:
exit-idle-time = -1
Optional: daemonize = yes (See if it works first before you do this.)
Right-click and run as administrator:
C:\WSL\pulseaudio\bin\pulseaudio.exe
You will get a Windows Defender Firewall has blocked some features of this app etc.
Check Private networks, such as my home or work network. Check Public networks, such as those in airports and coffee shops (not recommended because these networks often have little or no security).
Click Allow access.
You will see these errors in the console window for pulseaudio which you seem to be able to ignore.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported on Win32.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported on Win32.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported on Win32.
W: [(null)] pulsecore/core.c: failed to allocate shared memory pool. Falling back to a normal memory pool.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported on Win32.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported on Win32.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported on Win32.
E: [(null)] daemon/main.c: Failed to load directory.
Start ArchWSL
Run Arch.exe again.
In the Arch console window complete the following…
Change root password
passwd
Add the wheel group for sudo.
EDITOR=nano visudo
Uncomment this line.
%wheel ALL=(ALL) ALL
Add a new user to the wheel group for sudo.
useradd -m -G wheel -s /bin/bash someusername
Change the password of the user.
passwd someusername
Close the Arch.exe console and reopen it in command prompt with your new user account. You only have to run this command one time. After that, you can just click on your Arch.exe and it will default to this account.
Arch.exe config --default-user someusername
Load pacman keys.
sudo pacman-key --init
sudo pacman-key --populate
Update system with pacman.
Warning!: If you get prompted to replace fakeroot-tcp with fakeroot because of conflict DO NOT DO SO!!! type n. Otherwise, you will have fun manually recompiling fakeroot-tcp to work again as you won’t be able to install anything. Which I believe happens with installing base-devel below.
It might be best to add fakeroot to the pacman ignore list.
Edit
/etc/pacman.conf
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
IgnorePkg = fakeroot
#IgnoreGroup =
For fun uncomment and add ILoveCandy
Color
ILoveCandy
TotalDownload
Windows Terminal: https://www.microsoft.com/store/productId/9N0DX20HK701
If you added fakeroot to the IgnorePkg list above you don’t need the –ignore=fakeroot on your pacman commands below.
The default mirror in the package seemed to be super slow sometimes dropping out so do this if you want to fix that. Change the Country Name with your own.
sudo pacman -Sy curl pacman-contrib
Backup your mirror file.
sudo cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.backup
Local Way.
Uncomment your country.
sudo awk '/^## Country Name$/{f=1; next}f==0{next}/^$/{exit}{print substr($0, 1);}' /etc/pacman.d/mirrorlist.backup
Generate a new list.
sudo rankmirrors -n 6 /etc/pacman.d/mirrorlist.backup > /etc/pacman.d/mirrorlist
Online Way.
cd /etc/pacman.d
sudo curl -s "https://www.archlinux.org/mirrorlist/?country=US&country=CA&protocol=https&use_mirror_status=on" | sed -e 's/^#Server/Server/' -e '/^#/d' | rankmirrors -n 5 -
Update all current system packages.
sudo pacman -Syu --ignore=fakeroot
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Packages (42) acl-2.2.53-3 archlinux-keyring-20200422-1 argon2-20190702-3 attr-2.4.48-3
ca-certificates-mozilla-3.52-1 cryptsetup-2.3.2-2 curl-7.70.0-1 device-mapper-2.02.187-2
e2fsprogs-1.45.6-2 filesystem-2020.05.07-1 gawk-5.1.0-1 gettext-0.20.2-1 glib2-2.64.2-1
gnutls-3.6.13-2 gpgme-1.13.1-5 iana-etc-20200428-1 icu-67.1-1 iproute2-5.6.0-1 json-c-0.14-4
keyutils-1.6.1-4 libffi-3.3-3 libnftnl-1.1.6-1 libp11-kit-0.23.20-5 libsasl-2.1.27-3
libsecret-0.20.3-1 libtirpc-1.2.6-1 libutil-linux-2.35.1-2 libxml2-2.9.10-2 licenses-20200427-1
nano-4.9.2-1 nettle-3.6-1 openssl-1.1.1.g-1 p11-kit-0.23.20-5 pacman-5.2.1-5
pacman-mirrorlist-20200411-1 systemd-245.5-2 systemd-libs-245.5-2 systemd-sysvcompat-245.5-2
tzdata-2020a-1 util-linux-2.35.1-2 vim-8.2.0717-2 vim-runtime-8.2.0717-2
Total Download Size: 50.35 MiB
Total Installed Size: 194.05 MiB
Net Upgrade Size: 0.61 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
iana-etc-20200428-1-any 387.8 KiB 45.1 KiB/s 00:09 [########################################] 100%
filesystem-2020.05.07-1-x86_64 29.2 KiB 47.2 KiB/s 00:01 [########################################] 100%
tzdata-2020a-1-x86_64 366.5 KiB 113 KiB/s 00:03 [########################################] 100%
attr-2.4.48-3-x86_64 69.0 KiB 300 KiB/s 00:00 [########################################] 100%
acl-2.2.53-3-x86_64 136.6 KiB 198 KiB/s 00:01 [########################################] 100%
archlinux-keyring-20200422-1-any 890.6 KiB 68.7 KiB/s 00:13 [########################################] 100%
argon2-20190702-3-x86_64 33.1 KiB 60.1 KiB/s 00:01 [########################################] 100%
systemd-libs-245.5-2-x86_64 505.1 KiB 101 KiB/s 00:05 [########################################] 100%
libffi-3.3-3-x86_64 37.9 KiB 758 KiB/s 00:00 [########################################] 100%
libp11-kit-0.23.20-5-x86_64 472.3 KiB 95.4 KiB/s 00:05 [########################################] 100%
openssl-1.1.1.g-1-x86_64 3.6 MiB 169 KiB/s 00:22 [########################################] 100%
p11-kit-0.23.20-5-x86_64 137.3 KiB 205 KiB/s 00:01 [########################################] 100%
ca-certificates-mozilla-3.52-1-x86_64 336.7 KiB 111 KiB/s 00:03 [########################################] 100%
device-mapper-2.02.187-2-x86_64 291.6 KiB 188 KiB/s 00:02 [########################################] 100%
libutil-linux-2.35.1-2-x86_64 408.8 KiB 93.3 KiB/s 00:04 [########################################] 100%
json-c-0.14-4-x86_64 52.8 KiB 85.1 KiB/s 00:01 [########################################] 100%
cryptsetup-2.3.2-2-x86_64 541.8 KiB 155 KiB/s 00:03 [########################################] 100%
e2fsprogs-1.45.6-2-x86_64 1195.7 KiB 82.9 KiB/s 00:14 [########################################] 100%
keyutils-1.6.1-4-x86_64 90.8 KiB 52.5 KiB/s 00:02 [########################################] 100%
libsasl-2.1.27-3-x86_64 146.1 KiB 80.3 KiB/s 00:02 [########################################] 100%
curl-7.70.0-1-x86_64 1024.5 KiB 81.6 KiB/s 00:13 [########################################] 100%
gawk-5.1.0-1-x86_64 1139.2 KiB 123 KiB/s 00:09 [########################################] 100%
glib2-2.64.2-1-x86_64 2.8 MiB 109 KiB/s 00:26 [########################################] 100%
icu-67.1-1-x86_64 10.4 MiB 79.5 KiB/s 02:14 [########################################] 100%
gettext-0.20.2-1-x86_64 2.0 MiB 162 KiB/s 00:13 [########################################] 100%
nettle-3.6-1-x86_64 405.2 KiB 101 KiB/s 00:04 [########################################] 100%
gnutls-3.6.13-2-x86_64 2.7 MiB 81.7 KiB/s 00:34 [########################################] 100%
libsecret-0.20.3-1-x86_64 236.8 KiB 173 KiB/s 00:01 [########################################] 100%
gpgme-1.13.1-5-x86_64 437.1 KiB 132 KiB/s 00:03 [########################################] 100%
libnftnl-1.1.6-1-x86_64 70.1 KiB 195 KiB/s 00:00 [########################################] 100%
iproute2-5.6.0-1-x86_64 923.7 KiB 106 KiB/s 00:09 [########################################] 100%
libtirpc-1.2.6-1-x86_64 177.2 KiB 148 KiB/s 00:01 [########################################] 100%
licenses-20200427-1-any 69.6 KiB 166 KiB/s 00:00 [########################################] 100%
nano-4.9.2-1-x86_64 548.3 KiB 148 KiB/s 00:04 [########################################] 100%
pacman-mirrorlist-20200411-1-any 6.2 KiB 0.00 B/s 00:00 [########################################] 100%
pacman-5.2.1-5-x86_64 836.7 KiB 55.4 KiB/s 00:15 [########################################] 100%
util-linux-2.35.1-2-x86_64 2.4 MiB 95.3 KiB/s 00:26 [########################################] 100%
systemd-245.5-2-x86_64 5.6 MiB 101 KiB/s 00:56 [########################################] 100%
systemd-sysvcompat-245.5-2-x86_64 8.2 KiB 0.00 B/s 00:00 [########################################] 100%
libxml2-2.9.10-2-x86_64 1335.6 KiB 84.0 KiB/s 00:16 [########################################] 100%
vim-runtime-8.2.0717-2-x86_64 6.3 MiB 88.8 KiB/s 01:12 [########################################] 100%
vim-8.2.0717-2-x86_64 1651.8 KiB 86.9 KiB/s 00:19 [########################################] 100%
(42/42) checking keys in keyring [########################################] 100%
(42/42) checking package integrity [########################################] 100%
(42/42) loading package files [########################################] 100%
(42/42) checking for file conflicts [########################################] 100%
(42/42) checking available disk space [########################################] 100%
:: Processing package changes...
( 1/42) upgrading iana-etc [########################################] 100%
( 2/42) upgrading filesystem [########################################] 100%
warning: /etc/shadow installed as /etc/shadow.pacnew
( 3/42) upgrading tzdata [########################################] 100%
( 4/42) upgrading attr [########################################] 100%
( 5/42) upgrading acl [########################################] 100%
( 6/42) upgrading archlinux-keyring [########################################] 100%
==> Appending keys from archlinux.gpg...
==> Locally signing trusted keys in keyring...
-> Locally signing key D8AFDDA07A5B6EDFA7D8CCDAD6D055F927843F1C...
-> Locally signing key DDB867B92AA789C165EEFA799B729B06A680C281...
-> Locally signing key 91FFE0700E80619CEB73235CA88E23E377514E00...
-> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
-> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
==> Importing owner trust values...
==> Disabling revoked keys in keyring...
-> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
-> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
-> Disabling key 50F33E2E5B0C3D900424ABE89BDCF497A4BBCC7F...
-> Disabling key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
-> Disabling key 39F880E50E49A4D11341E8F939E4F17F295AFBF4...
-> Disabling key 8840BD07FC24CB7CE394A07CCF7037A4F27FB7DA...
-> Disabling key 5559BC1A32B8F76B3FCCD9555FA5E5544F010D48...
-> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
-> Disabling key 07DFD3A0BC213FA12EDC217559B3122E2FA915EC...
-> Disabling key 4FCF887689C41B09506BE8D5F3E1D5C5D30DB0AD...
-> Disabling key 5A2257D19FF7E1E0E415968CE62F853100F0D0F0...
-> Disabling key D921CABED130A5690EF1896E81AF739EC0711BF1...
-> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
-> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
-> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
-> Disabling key 5696C003B0854206450C8E5BE613C09CB4440678...
-> Disabling key 684148BB25B49E986A4944C55184252D824B18E8...
-> Disabling key 8CF934E339CAD8ABF342E822E711306E3C4F88BC...
-> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
-> Disabling key 5E7585ADFF106BFFBBA319DC654B877A0864983E...
-> Disabling key 65EEFE022108E2B708CBFCF7F9E712E59AF5F22A...
-> Disabling key 40440DC037C05620984379A6761FAD69BA06C6A9...
-> Disabling key 34C5D94FE7E7913E86DC427E7FB1A3800C84C0A5...
-> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
-> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
-> Disabling key 5357F3B111688D88C1D88119FCF2CB179205AC90...
-> Disabling key 4D913AECD81726D9A6C74F0ADA6426DD215B37AD...
-> Disabling key FB871F0131FEA4FB5A9192B4C8880A6406361833...
-> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
-> Disabling key B1F2C889CB2CCB2ADA36D963097D629E437520BD...
-> Disabling key 9515D8A8EAB88E49BB65EDBCE6B456CAF15447D5...
-> Disabling key 76B4192E902C0A52642C63C273B8ED52F1D357C1...
-> Disabling key 40776A5221EF5AD468A4906D42A1DB15EC133BAD...
-> Disabling key D4DE5ABDE2A7287644EAC7E36D1A9E70E19DAA50...
-> Disabling key 44D4A033AC140143927397D47EFD567D4C7EA887...
==> Updating trust database...
gpg: next trustdb check due at 2020-05-31
( 7/42) upgrading argon2 [########################################] 100%
( 8/42) upgrading systemd-libs [########################################] 100%
( 9/42) upgrading libffi [########################################] 100%
(10/42) upgrading libp11-kit [########################################] 100%
(11/42) upgrading openssl [########################################] 100%
(12/42) upgrading p11-kit [########################################] 100%
(13/42) upgrading ca-certificates-mozilla [########################################] 100%
(14/42) upgrading device-mapper [########################################] 100%
(15/42) upgrading libutil-linux [########################################] 100%
(16/42) upgrading json-c [########################################] 100%
(17/42) upgrading cryptsetup [########################################] 100%
(18/42) upgrading e2fsprogs [########################################] 100%
(19/42) upgrading keyutils [########################################] 100%
(20/42) upgrading libsasl [########################################] 100%
(21/42) upgrading curl [########################################] 100%
(22/42) upgrading gawk [########################################] 100%
(23/42) upgrading glib2 [########################################] 100%
(24/42) upgrading icu [########################################] 100%
(25/42) upgrading libxml2 [########################################] 100%
(26/42) upgrading gettext [########################################] 100%
(27/42) upgrading nettle [########################################] 100%
(28/42) upgrading gnutls [########################################] 100%
(29/42) upgrading libsecret [########################################] 100%
(30/42) upgrading gpgme [########################################] 100%
(31/42) upgrading libnftnl [########################################] 100%
(32/42) upgrading iproute2 [########################################] 100%
(33/42) upgrading libtirpc [########################################] 100%
(34/42) upgrading licenses [########################################] 100%
(35/42) upgrading nano [########################################] 100%
(36/42) upgrading pacman-mirrorlist [########################################] 100%
warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
(37/42) upgrading pacman [########################################] 100%
(38/42) upgrading util-linux [########################################] 100%
(39/42) upgrading systemd [########################################] 100%
(40/42) upgrading systemd-sysvcompat [########################################] 100%
(41/42) upgrading vim-runtime [########################################] 100%
(42/42) upgrading vim [########################################] 100%
:: Running post-transaction hooks...
( 1/10) Creating system user accounts...
( 2/10) Updating journal message catalog...
( 3/10) Reloading system manager configuration...
Skipped: Current root is not booted.
( 4/10) Updating udev hardware database...
( 5/10) Applying kernel sysctl settings...
Skipped: Current root is not booted.
( 6/10) Creating temporary files...
( 7/10) Reloading device manager configuration...
Skipped: Device manager is not running.
( 8/10) Arming ConditionNeedsUpdate...
( 9/10) Reloading system bus configuration...
Skipped: Current root is not booted.
(10/10) Rebuilding certificate stores...
Add some more packages to our ArchWSL build.
Make note of the line after the command “:: fakeroot is in IgnorePkg/IgnoreGroup. Install anyway? [Y/n] n” <= PRESS NO!
sudo pacman -S base-devel wget tmux pkg-config intltool libtool libsndfile json-c git ffmpeg --ignore=fakeroot
:: fakeroot is in IgnorePkg/IgnoreGroup. Install anyway? [Y/n] n
:: There are 23 members in group base-devel:
:: Repository core
1) autoconf 2) automake 3) binutils 4) bison 5) file 6) findutils 7) flex 8) gawk 9) gcc 10) gettext
11) grep 12) groff 13) gzip 14) libtool 15) m4 16) make 17) pacman 18) patch 19) pkgconf 20) sed 21) sudo
22) texinfo 23) which
Enter a selection (default=all):
warning: file-5.38-3 is up to date -- reinstalling
warning: findutils-4.7.0-2 is up to date -- reinstalling
warning: gawk-5.1.0-1 is up to date -- reinstalling
warning: gettext-0.20.2-1 is up to date -- reinstalling
warning: grep-3.4-1 is up to date -- reinstalling
warning: gzip-1.10-3 is up to date -- reinstalling
warning: pacman-5.2.1-5 is up to date -- reinstalling
warning: sed-4.8-1 is up to date -- reinstalling
warning: sudo-1.8.31.p1-1 is up to date -- reinstalling
warning: json-c-0.14-4 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
warning: dependency cycle detected:
warning: harfbuzz will be installed before its freetype2 dependency
warning: dependency cycle detected:
warning: mesa will be installed before its libglvnd dependency
Packages (145) alsa-lib-1.2.2-1 alsa-topology-conf-1.2.2-2 alsa-ucm-conf-1.2.2-1 aom-1.0.0.errata1+avif-1
dav1d-0.6.0-1 diffutils-3.7-3 elfutils-0.178-2 flac-1.3.3-1 fontconfig-2:2.13.91+24+g75eadca-2
freetype2-2.10.2-1 fribidi-1.0.9-1 gc-8.0.4-3 giflib-5.2.1-1 graphite-1:1.3.14-1 gsm-1.0.19-1
guile-2.2.6-2 harfbuzz-2.6.6-1 hicolor-icon-theme-0.17-2 jack-0.125.0-9 l-smash-2.14.5-2
lame-3.100-2 lcms2-2.9-2 libass-0.14.0-2 libasyncns-0.8+3+g68cd5af-2 libavc1394-0.5.4-4
libbluray-1.2.0-3 libdrm-2.4.101-1 libedit-20191231_3.1-1 libevent-2.1.11-5 libglvnd-1.3.1-1
libibus-1.5.22-1 libice-1.0.10-2 libiec61883-1.2.0-5 libjpeg-turbo-2.0.4-1 libmfx-20.1.1-1
libmicrohttpd-0.9.70-3 libmodplug-0.8.9.0-2 libmpc-1.1.0-2 libogg-1.3.4-2 libomxil-bellagio-0.9.3-2
libpciaccess-0.16-1 libpng-1.6.37-1 libpulse-13.0-3 libraw1394-2.1.2-2 libsamplerate-0.1.9-3
libsm-1.2.3-2 libsoxr-0.1.3-2 libssh-0.9.4-1 libtheora-1.1.1-4 libtiff-4.1.0-1 libunwind-1.3.1-1
libutempter-1.1.6-3 libva-2.7.1-1 libvdpau-1.4-1 libvorbis-1.3.6-1 libvpx-1.8.2-1 libwebp-1.1.0-1
libx11-1.6.9-6 libxau-1.0.9-2 libxcb-1.14-1 libxcursor-1.2.0-1 libxdamage-1.1.5-2 libxdmcp-1.1.3-2
libxext-1.3.4-2 libxfixes-5.0.3-3 libxi-1.7.10-2 libxrender-0.9.10-3 libxshmfence-1.3-2
libxtst-1.2.3-3 libxv-1.0.11-3 libxxf86vm-1.1.4-3 llvm-libs-10.0.0-1 lm_sensors-3.6.0-1
mesa-20.0.6-2 opencore-amr-0.1.5-3 openjpeg2-2.3.1-1 opus-1.3.1-1 perl-clone-0.45-1
perl-encode-locale-1.05-5 perl-error-0.17029-1 perl-file-listing-6.04-6 perl-html-parser-3.72-8
perl-html-tagset-3.20-8 perl-http-cookies-6.08-1 perl-http-daemon-6.06-1 perl-http-date-6.05-1
perl-http-message-6.24-1 perl-http-negotiate-6.01-6 perl-io-html-1.001-5 perl-libwww-6.44-1
perl-lwp-mediatypes-6.02-6 perl-mailtools-2.21-2 perl-net-http-6.19-2 perl-timedate-2.32-1
perl-try-tiny-0.30-3 perl-uri-1.76-2 perl-www-robotrules-6.02-6 perl-xml-parser-2.46-1 sdl2-2.0.12-1
speex-1.2.0-2 speexdsp-1.2.0-1 srt-1.4.1-1 sysfsutils-2.1.0-11 v4l-utils-1.18.1-1 vid.stab-1.1-2
vmaf-1.5.1-1 vulkan-icd-loader-1.2.140-1 wayland-1.18.0-2 x264-3:0.159.r2999.296494a-1 x265-3.3-1
xcb-proto-1.14-1 xorgproto-2020.1-1 xvidcore-1.3.7-1 zita-alsa-pcmi-0.3.2-2 zita-resampler-1.6.2-2
autoconf-2.69-7 automake-1.16.2-1 binutils-2.34-2 bison-3.5.4-1 ffmpeg-1:4.2.2-8 file-5.38-3
findutils-4.7.0-2 flex-2.6.4-3 gawk-5.1.0-1 gcc-9.3.0-1 gettext-0.20.2-1 git-2.26.2-1 grep-3.4-1
groff-1.22.4-3 gzip-1.10-3 intltool-0.51.0-4 json-c-0.14-4 libsndfile-1.0.28-3
libtool-2.4.6+42+gb88cebd5-12 m4-1.4.18-3 make-4.3-3 pacman-5.2.1-5 patch-2.7.6-8 pkgconf-1.6.3-4
sed-4.8-1 sudo-1.8.31.p1-1 texinfo-6.7-3 tmux-3.1_b-1 wget-1.20.3-3 which-2.21-5
Total Download Size: 139.47 MiB
Total Installed Size: 714.23 MiB
Net Upgrade Size: 687.41 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
m4-1.4.18-3-x86_64 169.4 KiB 207 KiB/s 00:01 [########################################] 100%
diffutils-3.7-3-x86_64 324.1 KiB 76.4 KiB/s 00:04 [########################################] 100%
autoconf-2.69-7-any 591.2 KiB 224 KiB/s 00:03 [########################################] 100%
automake-1.16.2-1-any 603.4 KiB 116 KiB/s 00:05 [########################################] 100%
libmicrohttpd-0.9.70-3-x86_64 202.8 KiB 99.4 KiB/s 00:02 [########################################] 100%
findutils-4.7.0-2-x86_64 454.6 KiB 79.6 KiB/s 00:06 [########################################] 100%
elfutils-0.178-2-x86_64 599.7 KiB 216 KiB/s 00:03 [########################################] 100%
binutils-2.34-2-x86_64 5.2 MiB 131 KiB/s 00:41 [########################################] 100%
bison-3.5.4-1-x86_64 678.4 KiB 133 KiB/s 00:05 [########################################] 100%
file-5.38-3-x86_64 314.2 KiB 383 KiB/s 00:01 [########################################] 100%
flex-2.6.4-3-x86_64 297.2 KiB 278 KiB/s 00:01 [########################################] 100%
libmpc-1.1.0-2-x86_64 65.1 KiB 542 KiB/s 00:00 [########################################] 100%
gcc-9.3.0-1-x86_64 29.8 MiB 139 KiB/s 03:41 [########################################] 100%
grep-3.4-1-x86_64 204.2 KiB 125 KiB/s 00:02 [########################################] 100%
groff-1.22.4-3-x86_64 2044.3 KiB 132 KiB/s 00:16 [########################################] 100%
gzip-1.10-3-x86_64 77.8 KiB 70.1 KiB/s 00:01 [########################################] 100%
libtool-2.4.6+42+gb88cebd5-12-x86_64 407.4 KiB 134 KiB/s 00:03 [########################################] 100%
texinfo-6.7-3-x86_64 1397.6 KiB 129 KiB/s 00:11 [########################################] 100%
make-4.3-3-x86_64 481.6 KiB 194 KiB/s 00:02 [########################################] 100%
patch-2.7.6-8-x86_64 92.5 KiB 289 KiB/s 00:00 [########################################] 100%
pkgconf-1.6.3-4-x86_64 58.7 KiB 150 KiB/s 00:00 [########################################] 100%
sed-4.8-1-x86_64 237.9 KiB 57.3 KiB/s 00:04 [########################################] 100%
sudo-1.8.31.p1-1-x86_64 870.0 KiB 83.3 KiB/s 00:10 [########################################] 100%
which-2.21-5-x86_64 15.8 KiB 0.00 B/s 00:00 [########################################] 100%
libevent-2.1.11-5-x86_64 244.8 KiB 95.3 KiB/s 00:03 [########################################] 100%
libedit-20191231_3.1-1-x86_64 106.9 KiB 81.0 KiB/s 00:01 [########################################] 100%
sysfsutils-2.1.0-11-x86_64 31.1 KiB 311 KiB/s 00:00 [########################################] 100%
gc-8.0.4-3-x86_64 221.1 KiB 91.7 KiB/s 00:02 [########################################] 100%
guile-2.2.6-2-x86_64 6.4 MiB 119 KiB/s 00:55 [########################################] 100%
wget-1.20.3-3-x86_64 722.2 KiB 110 KiB/s 00:07 [########################################] 100%
libutempter-1.1.6-3-x86_64 8.1 KiB 0.00 B/s 00:00 [########################################] 100%
perl-encode-locale-1.05-5-any 10.8 KiB 0.00 B/s 00:00 [########################################] 100%
perl-timedate-2.32-1-any 36.4 KiB 20.9 KiB/s 00:02 [########################################] 100%
perl-http-date-6.05-1-any 9.5 KiB 0.00 B/s 00:00 [########################################] 100%
perl-file-listing-6.04-6-any 8.3 KiB 0.00 B/s 00:00 [########################################] 100%
perl-html-tagset-3.20-8-any 10.9 KiB 0.00 B/s 00:00 [########################################] 100%
perl-html-parser-3.72-8-x86_64 79.4 KiB 153 KiB/s 00:01 [########################################] 100%
perl-clone-0.45-1-x86_64 10.4 KiB 0.00 B/s 00:00 [########################################] 100%
perl-io-html-1.001-5-any 13.4 KiB 0.00 B/s 00:00 [########################################] 100%
perl-lwp-mediatypes-6.02-6-any 18.6 KiB 103 KiB/s 00:00 [########################################] 100%
perl-uri-1.76-2-any 77.3 KiB 73.6 KiB/s 00:01 [########################################] 100%
perl-http-message-6.24-1-any 75.9 KiB 52.0 KiB/s 00:01 [########################################] 100%
perl-http-cookies-6.08-1-any 21.7 KiB 0.00 B/s 00:00 [########################################] 100%
perl-http-daemon-6.06-1-any 18.6 KiB 0.00 B/s 00:00 [########################################] 100%
perl-http-negotiate-6.01-6-any 12.1 KiB 0.00 B/s 00:00 [########################################] 100%
perl-net-http-6.19-2-any 22.7 KiB 568 KiB/s 00:00 [########################################] 100%
perl-try-tiny-0.30-3-any 18.4 KiB 0.00 B/s 00:00 [########################################] 100%
perl-www-robotrules-6.02-6-any 12.2 KiB 0.00 B/s 00:00 [########################################] 100%
perl-libwww-6.44-1-any 138.2 KiB 98.7 KiB/s 00:01 [########################################] 100%
perl-xml-parser-2.46-1-x86_64 164.7 KiB 63.1 KiB/s 00:03 [########################################] 100%
intltool-0.51.0-4-any 40.8 KiB 120 KiB/s 00:00 [########################################] 100%
libogg-1.3.4-2-x86_64 201.6 KiB 66.3 KiB/s 00:03 [########################################] 100%
flac-1.3.3-1-x86_64 270.8 KiB 63.7 KiB/s 00:04 [########################################] 100%
libvorbis-1.3.6-1-x86_64 294.1 KiB 72.1 KiB/s 00:04 [########################################] 100%
libsndfile-1.0.28-3-x86_64 344.9 KiB 122 KiB/s 00:03 [########################################] 100%
perl-error-0.17029-1-any 22.3 KiB 0.00 B/s 00:00 [########################################] 100%
perl-mailtools-2.21-2-any 62.1 KiB 36.9 KiB/s 00:02 [########################################] 100%
git-2.26.2-1-x86_64 6.2 MiB 105 KiB/s 01:01 [########################################] 100%
alsa-topology-conf-1.2.2-2-any 8.2 KiB 0.00 B/s 00:00 [########################################] 100%
alsa-ucm-conf-1.2.2-1-any 28.9 KiB 0.00 B/s 00:00 [########################################] 100%
alsa-lib-1.2.2-1-x86_64 454.0 KiB 185 KiB/s 00:02 [########################################] 100%
aom-1.0.0.errata1+avif-1-x86_64 2.6 MiB 416 KiB/s 00:06 [########################################] 100%
libpng-1.6.37-1-x86_64 237.5 KiB 354 KiB/s 00:01 [########################################] 100%
graphite-1:1.3.14-1-x86_64 224.5 KiB 308 KiB/s 00:01 [########################################] 100%
harfbuzz-2.6.6-1-x86_64 895.7 KiB 243 KiB/s 00:04 [########################################] 100%
freetype2-2.10.2-1-x86_64 497.9 KiB 169 KiB/s 00:03 [########################################] 100%
fontconfig-2:2.13.91+24+g75eadca-2-x86_64 895.9 KiB 72.0 KiB/s 00:12 [########################################] 100%
fribidi-1.0.9-1-x86_64 42.2 KiB 264 KiB/s 00:00 [########################################] 100%
gsm-1.0.19-1-x86_64 37.3 KiB 177 KiB/s 00:00 [########################################] 100%
libsamplerate-0.1.9-3-x86_64 1378.0 KiB 59.0 KiB/s 00:23 [########################################] 100%
zita-alsa-pcmi-0.3.2-2-x86_64 19.2 KiB 0.00 B/s 00:00 [########################################] 100%
zita-resampler-1.6.2-2-x86_64 115.3 KiB 288 KiB/s 00:00 [########################################] 100%
jack-0.125.0-9-x86_64 386.4 KiB 59.3 KiB/s 00:07 [########################################] 100%
lame-3.100-2-x86_64 256.5 KiB 59.6 KiB/s 00:04 [########################################] 100%
libass-0.14.0-2-x86_64 100.3 KiB 150 KiB/s 00:01 [########################################] 100%
libraw1394-2.1.2-2-x86_64 44.4 KiB 135 KiB/s 00:00 [########################################] 100%
libavc1394-0.5.4-4-x86_64 32.6 KiB 125 KiB/s 00:00 [########################################] 100%
libbluray-1.2.0-3-x86_64 866.3 KiB 86.9 KiB/s 00:10 [########################################] 100%
vulkan-icd-loader-1.2.140-1-x86_64 112.5 KiB 44.8 KiB/s 00:03 [########################################] 100%
dav1d-0.6.0-1-x86_64 371.2 KiB 158 KiB/s 00:02 [########################################] 100%
libpciaccess-0.16-1-x86_64 20.0 KiB 0.00 B/s 00:00 [########################################] 100%
libdrm-2.4.101-1-x86_64 262.7 KiB 123 KiB/s 00:02 [########################################] 100%
libiec61883-1.2.0-5-x86_64 31.1 KiB 194 KiB/s 00:00 [########################################] 100%
libmodplug-0.8.9.0-2-x86_64 152.3 KiB 145 KiB/s 00:01 [########################################] 100%
libomxil-bellagio-0.9.3-2-x86_64 116.8 KiB 50.3 KiB/s 00:02 [########################################] 100%
libasyncns-0.8+3+g68cd5af-2-x86_64 15.8 KiB 0.00 B/s 00:00 [########################################] 100%
xcb-proto-1.14-1-any 108.9 KiB 74.6 KiB/s 00:01 [########################################] 100%
libxdmcp-1.1.3-2-x86_64 25.7 KiB 321 KiB/s 00:00 [########################################] 100%
libxau-1.0.9-2-x86_64 10.5 KiB 0.00 B/s 00:00 [########################################] 100%
libxcb-1.14-1-x86_64 999.8 KiB 58.5 KiB/s 00:17 [########################################] 100%
xorgproto-2020.1-1-any 237.9 KiB 108 KiB/s 00:02 [########################################] 100%
libx11-1.6.9-6-x86_64 2028.1 KiB 67.4 KiB/s 00:30 [########################################] 100%
libxext-1.3.4-2-x86_64 103.4 KiB 220 KiB/s 00:00 [########################################] 100%
libxi-1.7.10-2-x86_64 145.8 KiB 247 KiB/s 00:01 [########################################] 100%
libxfixes-5.0.3-3-x86_64 12.7 KiB 0.00 B/s 00:00 [########################################] 100%
libxtst-1.2.3-3-x86_64 28.1 KiB 256 KiB/s 00:00 [########################################] 100%
libice-1.0.10-2-x86_64 74.3 KiB 124 KiB/s 00:01 [########################################] 100%
libsm-1.2.3-2-x86_64 45.5 KiB 85.9 KiB/s 00:01 [########################################] 100%
libpulse-13.0-3-x86_64 393.3 KiB 73.1 KiB/s 00:05 [########################################] 100%
libsoxr-0.1.3-2-x86_64 126.6 KiB 144 KiB/s 00:01 [########################################] 100%
libssh-0.9.4-1-x86_64 193.2 KiB 203 KiB/s 00:01 [########################################] 100%
libtheora-1.1.1-4-x86_64 272.8 KiB 144 KiB/s 00:02 [########################################] 100%
wayland-1.18.0-2-x86_64 130.2 KiB 117 KiB/s 00:01 [########################################] 100%
libxxf86vm-1.1.4-3-x86_64 15.0 KiB 0.00 B/s 00:00 [########################################] 100%
libxdamage-1.1.5-2-x86_64 6.8 KiB 0.00 B/s 00:00 [########################################] 100%
libxshmfence-1.3-2-x86_64 5.7 KiB 0.00 B/s 00:00 [########################################] 100%
libunwind-1.3.1-1-x86_64 108.6 KiB 170 KiB/s 00:01 [########################################] 100%
llvm-libs-10.0.0-1-x86_64 21.3 MiB 215 KiB/s 01:41 [########################################] 100%
lm_sensors-3.6.0-1-x86_64 128.0 KiB 225 KiB/s 00:01 [########################################] 100%
mesa-20.0.6-2-x86_64 13.1 MiB 121 KiB/s 01:51 [########################################] 100%
libglvnd-1.3.1-1-x86_64 370.7 KiB 65.5 KiB/s 00:06 [########################################] 100%
libva-2.7.1-1-x86_64 162.1 KiB 128 KiB/s 00:01 [########################################] 100%
libvdpau-1.4-1-x86_64 60.6 KiB 196 KiB/s 00:00 [########################################] 100%
vid.stab-1.1-2-x86_64 46.8 KiB 312 KiB/s 00:00 [########################################] 100%
libvpx-1.8.2-1-x86_64 1217.6 KiB 84.8 KiB/s 00:14 [########################################] 100%
libjpeg-turbo-2.0.4-1-x86_64 449.5 KiB 55.4 KiB/s 00:08 [########################################] 100%
libtiff-4.1.0-1-x86_64 816.3 KiB 69.2 KiB/s 00:12 [########################################] 100%
giflib-5.2.1-1-x86_64 69.0 KiB 126 KiB/s 00:01 [########################################] 100%
libwebp-1.1.0-1-x86_64 336.9 KiB 142 KiB/s 00:02 [########################################] 100%
l-smash-2.14.5-2-x86_64 313.7 KiB 135 KiB/s 00:02 [########################################] 100%
x264-3:0.159.r2999.296494a-1-x86_64 718.8 KiB 250 KiB/s 00:03 [########################################] 100%
x265-3.3-1-x86_64 1593.2 KiB 87.2 KiB/s 00:18 [########################################] 100%
libxv-1.0.11-3-x86_64 34.6 KiB 247 KiB/s 00:00 [########################################] 100%
xvidcore-1.3.7-1-x86_64 202.3 KiB 102 KiB/s 00:02 [########################################] 100%
opencore-amr-0.1.5-3-x86_64 132.6 KiB 77.6 KiB/s 00:02 [########################################] 100%
lcms2-2.9-2-x86_64 186.6 KiB 124 KiB/s 00:02 [########################################] 100%
openjpeg2-2.3.1-1-x86_64 879.2 KiB 127 KiB/s 00:07 [########################################] 100%
opus-1.3.1-1-x86_64 368.6 KiB 183 KiB/s 00:02 [########################################] 100%
libxrender-0.9.10-3-x86_64 23.9 KiB 0.00 B/s 00:00 [########################################] 100%
libxcursor-1.2.0-1-x86_64 27.7 KiB 0.00 B/s 00:00 [########################################] 100%
libibus-1.5.22-1-x86_64 7.0 MiB 201 KiB/s 00:36 [########################################] 100%
sdl2-2.0.12-1-x86_64 687.1 KiB 164 KiB/s 00:04 [########################################] 100%
speexdsp-1.2.0-1-x86_64 448.2 KiB 110 KiB/s 00:04 [########################################] 100%
speex-1.2.0-2-x86_64 477.6 KiB 146 KiB/s 00:03 [########################################] 100%
srt-1.4.1-1-x86_64 911.3 KiB 59.4 KiB/s 00:15 [########################################] 100%
hicolor-icon-theme-0.17-2-any 10.2 KiB 0.00 B/s 00:00 [########################################] 100%
v4l-utils-1.18.1-1-x86_64 1265.3 KiB 106 KiB/s 00:12 [########################################] 100%
ffmpeg-1:4.2.2-8-x86_64 9.5 MiB 90.4 KiB/s 01:48 [########################################] 100%
tmux-3.1_b-1-x86_64 318.0 KiB 206 KiB/s 00:02 [########################################] 100%
libmfx-20.1.1-1-x86_64 51.7 KiB 167 KiB/s 00:00 [########################################] 100%
vmaf-1.5.1-1-x86_64 707.7 KiB 142 KiB/s 00:05 [########################################] 100%
(145/145) checking keys in keyring [########################################] 100%
(145/145) checking package integrity [########################################] 100%
(145/145) loading package files [########################################] 100%
(145/145) checking for file conflicts [########################################] 100%
(145/145) checking available disk space [########################################] 100%
:: Processing package changes...
( 1/145) reinstalling gawk [########################################] 100%
( 2/145) installing m4 [########################################] 100%
( 3/145) installing diffutils [########################################] 100%
( 4/145) installing autoconf [########################################] 100%
( 5/145) installing automake [########################################] 100%
( 6/145) installing libmicrohttpd [########################################] 100%
( 7/145) reinstalling findutils [########################################] 100%
( 8/145) installing elfutils [########################################] 100%
( 9/145) installing binutils [########################################] 100%
( 10/145) installing bison [########################################] 100%
( 11/145) reinstalling file [########################################] 100%
( 12/145) installing flex [########################################] 100%
( 13/145) installing libmpc [########################################] 100%
( 14/145) installing gcc [########################################] 100%
Optional dependencies for gcc
lib32-gcc-libs: for generating code for 32-bit ABI
( 15/145) reinstalling gettext [########################################] 100%
( 16/145) reinstalling grep [########################################] 100%
( 17/145) installing groff [########################################] 100%
Optional dependencies for groff
netpbm: for use together with man -H command interaction in browsers
psutils: for use together with man -H command interaction in browsers
libxaw: for gxditview
perl-file-homedir: for use with glilypond
( 18/145) reinstalling gzip [########################################] 100%
( 19/145) installing libtool [########################################] 100%
( 20/145) installing texinfo [########################################] 100%
( 21/145) installing gc [########################################] 100%
( 22/145) installing guile [########################################] 100%
( 23/145) installing make [########################################] 100%
( 24/145) reinstalling pacman [########################################] 100%
( 25/145) installing patch [########################################] 100%
Optional dependencies for patch
ed: for patch -e functionality
( 26/145) installing pkgconf [########################################] 100%
( 27/145) reinstalling sed [########################################] 100%
( 28/145) reinstalling sudo [########################################] 100%
( 29/145) installing which [########################################] 100%
( 30/145) installing wget [########################################] 100%
Optional dependencies for wget
ca-certificates: HTTPS downloads [installed]
( 31/145) installing libevent [########################################] 100%
Optional dependencies for libevent
python: to use event_rpcgen.py
( 32/145) installing libutempter [########################################] 100%
( 33/145) installing tmux [########################################] 100%
( 34/145) installing perl-encode-locale [########################################] 100%
( 35/145) installing perl-timedate [########################################] 100%
( 36/145) installing perl-http-date [########################################] 100%
( 37/145) installing perl-file-listing [########################################] 100%
( 38/145) installing perl-html-tagset [########################################] 100%
( 39/145) installing perl-html-parser [########################################] 100%
( 40/145) installing perl-clone [########################################] 100%
( 41/145) installing perl-io-html [########################################] 100%
( 42/145) installing perl-lwp-mediatypes [########################################] 100%
( 43/145) installing perl-uri [########################################] 100%
( 44/145) installing perl-http-message [########################################] 100%
( 45/145) installing perl-http-cookies [########################################] 100%
( 46/145) installing perl-http-daemon [########################################] 100%
( 47/145) installing perl-http-negotiate [########################################] 100%
( 48/145) installing perl-net-http [########################################] 100%
( 49/145) installing perl-try-tiny [########################################] 100%
( 50/145) installing perl-www-robotrules [########################################] 100%
( 51/145) installing perl-libwww [########################################] 100%
Optional dependencies for perl-libwww
perl-lwp-protocol-https: for https:// url schemes
( 52/145) installing perl-xml-parser [########################################] 100%
( 53/145) installing intltool [########################################] 100%
( 54/145) installing libogg [########################################] 100%
( 55/145) installing flac [########################################] 100%
( 56/145) installing libvorbis [########################################] 100%
( 57/145) installing libsndfile [########################################] 100%
Optional dependencies for libsndfile
alsa-lib: for sndfile-play [pending]
( 58/145) reinstalling json-c [########################################] 100%
( 59/145) installing perl-error [########################################] 100%
( 60/145) installing perl-mailtools [########################################] 100%
( 61/145) installing git [########################################] 100%
Optional dependencies for git
tk: gitk and git gui
perl-libwww: git svn [installed]
perl-term-readkey: git svn and interactive.singlekey setting
perl-mime-tools: git send-email
perl-net-smtp-ssl: git send-email TLS support
perl-authen-sasl: git send-email TLS support
perl-mediawiki-api: git mediawiki support
perl-datetime-format-iso8601: git mediawiki support
perl-lwp-protocol-https: git mediawiki https support
perl-cgi: gitweb (web interface) support
python: git svn & git p4
subversion: git svn
org.freedesktop.secrets: keyring credential helper
libsecret: libsecret credential helper [installed]
( 62/145) installing alsa-topology-conf [########################################] 100%
( 63/145) installing alsa-ucm-conf [########################################] 100%
( 64/145) installing alsa-lib [########################################] 100%
( 65/145) installing aom [########################################] 100%
( 66/145) installing libpng [########################################] 100%
( 67/145) installing graphite [########################################] 100%
( 68/145) installing harfbuzz [########################################] 100%
Optional dependencies for harfbuzz
cairo: hb-view program
( 69/145) installing freetype2 [########################################] 100%
( 70/145) installing fontconfig [########################################] 100%
Fontconfig configuration is done via /etc/fonts/conf.avail and conf.d.
Read /etc/fonts/conf.d/README for more information.
Configuration via /etc/fonts/local.conf is still possible,
but is no longer recommended for options available in conf.avail.
Main systemwide configuration should be done by symlinks
(especially for autohinting, sub-pixel and lcdfilter):
cd /etc/fonts/conf.d
ln -s ../conf.avail/XX-foo.conf
Check also https://wiki.archlinux.org/index.php/Font_Configuration
and https://wiki.archlinux.org/index.php/Fonts.
Rebuilding fontconfig cache... done.
( 71/145) installing fribidi [########################################] 100%
( 72/145) installing gsm [########################################] 100%
( 73/145) installing libsamplerate [########################################] 100%
Optional dependencies for libsamplerate
libsndfile.so: for sndfile-resample [installed]
( 74/145) installing zita-alsa-pcmi [########################################] 100%
( 75/145) installing zita-resampler [########################################] 100%
Optional dependencies for zita-resampler
libsndfile: for zresample and zretune [installed]
( 76/145) installing jack [########################################] 100%
Optional dependencies for jack
celt: NetJACK driver
libffado: FireWire support
realtime-privileges: Acquire realtime privileges
( 77/145) installing lame [########################################] 100%
( 78/145) installing libass [########################################] 100%
( 79/145) installing libraw1394 [########################################] 100%
( 80/145) installing libavc1394 [########################################] 100%
( 81/145) installing libbluray [########################################] 100%
Optional dependencies for libbluray
java-runtime: BD-J library
( 82/145) installing vulkan-icd-loader [########################################] 100%
Optional dependencies for vulkan-icd-loader
vulkan-driver: packaged vulkan driver
( 83/145) installing dav1d [########################################] 100%
( 84/145) installing libpciaccess [########################################] 100%
( 85/145) installing libdrm [########################################] 100%
( 86/145) installing libiec61883 [########################################] 100%
( 87/145) installing libmfx [########################################] 100%
( 88/145) installing libmodplug [########################################] 100%
( 89/145) installing libomxil-bellagio [########################################] 100%
( 90/145) installing libasyncns [########################################] 100%
( 91/145) installing xcb-proto [########################################] 100%
( 92/145) installing libxdmcp [########################################] 100%
( 93/145) installing libxau [########################################] 100%
( 94/145) installing libxcb [########################################] 100%
( 95/145) installing xorgproto [########################################] 100%
( 96/145) installing libx11 [########################################] 100%
( 97/145) installing libxext [########################################] 100%
( 98/145) installing libxi [########################################] 100%
( 99/145) installing libxfixes [########################################] 100%
(100/145) installing libxtst [########################################] 100%
(101/145) installing libice [########################################] 100%
(102/145) installing libsm [########################################] 100%
(103/145) installing libpulse [########################################] 100%
(104/145) installing libsoxr [########################################] 100%
(105/145) installing libssh [########################################] 100%
(106/145) installing libtheora [########################################] 100%
(107/145) installing wayland [########################################] 100%
(108/145) installing libxxf86vm [########################################] 100%
(109/145) installing libxdamage [########################################] 100%
(110/145) installing libxshmfence [########################################] 100%
(111/145) installing libunwind [########################################] 100%
(112/145) installing libedit [########################################] 100%
(113/145) installing llvm-libs [########################################] 100%
(114/145) installing lm_sensors [########################################] 100%
Optional dependencies for lm_sensors
rrdtool: for logging with sensord
(115/145) installing mesa [########################################] 100%
Optional dependencies for mesa
opengl-man-pages: for the OpenGL API man pages
mesa-vdpau: for accelerated video playback
libva-mesa-driver: for accelerated video playback
(116/145) installing libglvnd [########################################] 100%
(117/145) installing libva [########################################] 100%
Optional dependencies for libva
intel-media-driver: backend for Intel GPUs (>= Broadwell)
libva-vdpau-driver: backend for Nvidia and AMD GPUs
libva-intel-driver: backend for Intel GPUs (<= Haswell)
(118/145) installing libvdpau [########################################] 100%
(119/145) installing vid.stab [########################################] 100%
(120/145) installing libvpx [########################################] 100%
(121/145) installing libjpeg-turbo [########################################] 100%
(122/145) installing libtiff [########################################] 100%
Optional dependencies for libtiff
freeglut: for using tiffgt
(123/145) installing giflib [########################################] 100%
(124/145) installing libwebp [########################################] 100%
Optional dependencies for libwebp
freeglut: vwebp viewer
(125/145) installing l-smash [########################################] 100%
(126/145) installing x264 [########################################] 100%
(127/145) installing x265 [########################################] 100%
(128/145) installing libxv [########################################] 100%
(129/145) installing xvidcore [########################################] 100%
(130/145) installing opencore-amr [########################################] 100%
(131/145) installing lcms2 [########################################] 100%
(132/145) installing openjpeg2 [########################################] 100%
(133/145) installing opus [########################################] 100%
(134/145) installing libxrender [########################################] 100%
(135/145) installing libxcursor [########################################] 100%
Optional dependencies for libxcursor
gnome-themes-standard: fallback icon theme
(136/145) installing libibus [########################################] 100%
(137/145) installing sdl2 [########################################] 100%
Optional dependencies for sdl2
alsa-lib: ALSA audio driver [installed]
libpulse: PulseAudio audio driver [installed]
jack: JACK audio driver [installed]
(138/145) installing speexdsp [########################################] 100%
(139/145) installing speex [########################################] 100%
(140/145) installing srt [########################################] 100%
(141/145) installing hicolor-icon-theme [########################################] 100%
(142/145) installing sysfsutils [########################################] 100%
(143/145) installing v4l-utils [########################################] 100%
Optional dependencies for v4l-utils
qt5-base: for qv4l2
alsa-lib: for qv4l2 [installed]
(144/145) installing vmaf [########################################] 100%
(145/145) installing ffmpeg [########################################] 100%
Optional dependencies for ffmpeg
intel-media-sdk: Intel QuickSync support
ladspa: LADSPA filters
nvidia-utils: Nvidia NVDEC/NVENC support
:: Running post-transaction hooks...
(1/7) Creating system user accounts...
(2/7) Reloading system manager configuration...
Skipped: Current root is not booted.
(3/7) Creating temporary files...
(4/7) Reloading device manager configuration...
Skipped: Device manager is not running.
(5/7) Arming ConditionNeedsUpdate...
(6/7) Warn about old perl modules
(7/7) Updating the info directory file...
Make a code directory in your home folder to spam packages into.
cd
mkdir code
cd code
Git YAY! I would normally suggest installing all packages manually like below with “makepkg -si” without “YAY” but it makes it quicker for this instance to grab all the working dependencies from AUR for you that go with the packages you require but it is never recommended to use it.
git clone https://aur.archlinux.org/yay.git
cd yay
makepkg -si
cd ..
Git pulseaudio, edit and compile.
git clone git://anongit.freedesktop.org/pulseaudio/pulseaudio
cd pulseaudio/src/pulsecore/
Edit
pulseaudio/src/pulsecore/mutex-posix.c
under:
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
Add a line 24ish:
#undef HAVE_PTHREAD_PRIO_INHERIT
Save file and exit editor.
cd ../..
Edit bootstrap.sh
The final lines around 45 to look like this:
if test "x$NOCONFIGURE" = "x"; then
CFLAGS="$CFLAGS -g -O0" ./configure --disable-bluez4 --disable-bluez5 --disable-rpath --disable-asyncns --disable-udev --disable-systemd-daemon --without-caps --enable-force-preopen "$@" && \
make clean
fi
Save and exit editor.
Compile pulseaudio
./bootstrap.sh
make
sudo make install
Export Pulse Server.
WSL V1
export PULSE_SERVER=tcp:127.0.0.1
WSL V2
export PULSE_SERVER=tcp:$(grep nameserver /etc/resolv.conf | awk '{print $2}');
Add export above to:
~/.bashrc
So it sticks on every console startup.
Test sound should hear static if your volume controls are up.
pacat < /dev/urandom
If you get this error (Which happens in WSL2):
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
This is an issue with the Windows Pulseaudio ACL configuration for WSL2 you need to allow it’s IP range of auth-ip-acl=172.16.0.0/12 as it will use a random IP address from that octet range.
Check your WSL console IP
ip a show dev eth0
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:15:5d:55:d8:4e brd ff:ff:ff:ff:ff:ff
inet 172.20.184.10/16 brd 172.20.255.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::215:5dff:fe55:d84e/64 scope link
valid_lft forever preferred_lft forever
Edit C:\WSL\pulseaudio\etc\pulse\default.pa
load-module module-native-protocol-tcp auth-ip-acl=172.16.0.0/12 auth-anonymous=1
Edit your export command with (WSL2)
export PULSE_SERVER=tcp:$(grep nameserver /etc/resolv.conf | awk '{print $2}');
Test an audio file.
cd
mkdir Music
cd Music
wget https://file-examples.com/wp-content/uploads/2017/11/file_example_MP3_5MG.mp3
https://thesissahib.bandcamp.com/album/thesis-sahib-loved-ones https://bandcamptomp3.com/ https://thesissahib.bandcamp.com/track/punk-rock-soccer-mom
ffplay -nodisp file_example_MP3_5MG.mp3
ffplay -nodisp Punk-Rock-Soccer-Mom.mp3
Hear audio? I hope so…
Install tizonia-all-git which will fail because the github to soundcloud has been abandoned :(
yay -Sy tizonia-all-git
You may or may not have to manually grab the dependencies and then edit tizonia makepkg to remove soundcloud as I did below which you can then install via pip if not skip this section and test Tizonia.
yay -Sy log4c
yay -Sy libspotify
yay -Sy python-pafy
yay -Sy python-gmusicapi
yay -Sy python-soundcloud
yay -Sy python-fuzzywuzzy
yay -Sy python-plexapi
yay -Sy python-pychromecast-git
yay -Sy python-setuptools
easy_install pip
pip install soundcloud
Install Tizonia
git clone https://aur.archlinux.org/tizonia-all-git.git
cd tizonia-all-git
Edit PKGBUILD
Remove python-soundcloud from the list like this below.
# AUR:
'log4c'
'libspotify'
'python-pafy'
'python-gmusicapi'
'python-pychromecast-git'
'python-plexapi'
'python-fuzzywuzzy'
'python-spotipy'
Compile Tizonia
makepkg -si
Test Tizonia
tizonia http://vis.media-ice.musicradio.com/LBCUKMP3Low
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[http] [Connecting to radio station] : 'http://vis.media-ice.musicradio.com/LBCUKMP3Low'.
Accept-Ranges : none
Content-Type : audio/mpeg
icy-br : 48
ice-audio-info : ice-samplerate=44100;ice-bitrate=48;ice-channels=1
icy-br : 48
icy-description : LBC UK
icy-genre : Talk
icy-name : LBC UK
icy-private : 0
icy-pub : 1
Server : Icecast 2.3.3-kh11
Cache-Control : no-cache, no-store
Pragma : no-cache
Access-Control-Allow-Origin : *
Access-Control-Allow-Headers : Origin, Accept, X-Requested-With, Content-Type
Access-Control-Allow-Methods : GET, OPTIONS, HEAD
Connection : close
Expires : Mon, 26 Jul 1997 05:00:00 GMT
[http/mp3] [Connected] : 'http://vis.media-ice.musicradio.com/LBCUKMP3Low'.
1 Ch, 44.1 KHz, 16:s:b
shared memfd open() failed: Function not implemented
2 Ch, 44.1 KHz, 16:s:b
You will see errors like this which can be ignored if the sound is working.
(In WSL 1, in version 2 I didn’t see these errors)
shared memfd open() failed: Function not implemented
WSL 2
Local Media Test - Works!
tizonia $HOME/music --recurse --shuffle
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
Playlist length: 1. File extensions in playlist: .mp3
[mp3] [decode] : '/home/nonasuomy/music/file_example_MP3_5MG.mp3'.
Impact Moderato, Kevin MacLeod
Album : YouTube Audio Library
Duration : 2m:12s
Size : 5 MiB
Genre : Cinematic
2 Ch, 44.1 KHz, 320 Kbps, 16:s:l
0% 10 20 30 40 50 60 70 80 90 100%
0s |----|----|----|----|----|----|----|----|----|----| 2m:12s
1m:47s
Shoutcast Client Test - Works!
tizonia http://vis.media-ice.musicradio.com/LBCUKMP3Low
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[http] [Connecting to radio station] : 'http://vis.media-ice.musicradio.com/LBCUKMP3Low'.
Accept-Ranges : none
Content-Type : audio/mpeg
icy-br : 48
ice-audio-info : ice-samplerate=44100;ice-bitrate=48;ice-channels=1
icy-br : 48
icy-description : LBC UK
icy-genre : Talk
icy-name : LBC UK
icy-private : 0
icy-pub : 1
Server : Icecast 2.3.3-kh11
Cache-Control : no-cache, no-store
Pragma : no-cache
Access-Control-Allow-Origin : *
Access-Control-Allow-Headers : Origin, Accept, X-Requested-With, Content-Type
Access-Control-Allow-Methods : GET, OPTIONS, HEAD
Connection : close
Expires : Mon, 26 Jul 1997 05:00:00 GMT
[http/mp3] [Connected] : 'http://vis.media-ice.musicradio.com/LBCUKMP3Low'.
1 Ch, 44.1 KHz, 16:s:b
2 Ch, 44.1 KHz, 16:s:b
SoundCloud Test - Working!
tizonia --soundcloud-creator "thesis sahib"
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[SoundCloud] [Connecting] : 'SoundCloudOAuthToken'.
[SoundCloud] [Track] 'Ink Or Paint'.
[SoundCloud] [Track] 'Tin Man's Shoes'.
[SoundCloud] [Track] 'The Map'.
[SoundCloud] [Track] 'The BUtcher's Daughter'.
[SoundCloud] [Track] 'Serious Fun'.
[SoundCloud] [Track] 'Plastic Spoons'.
[SoundCloud] [Track] 'On The Road To Rotting'.
[SoundCloud] [Track] 'Inside Voices'.
[SoundCloud] [Track] 'Again And The Guilty Man'.
[SoundCloud] [Track] 'I'll Ride Away'.
[SoundCloud] [Track] 'The Old Future'.
[SoundCloud] [Track] 'Automobile'.
[SoundCloud] [Track] 'Tin Man's Shoes'.
[SoundCloud] [Track] 'New Same Old'.
[SoundCloud] [Track] 'Man'.
[SoundCloud] [Track] 'Different Fire: produced by Thesis Sahib'.
[SoundCloud] [Track] 'Flesh Baron: Thesis Sahib produced by Funken'.
[SoundCloud] [Track] 'I Could Talk Fast But Instead: Produced by Thesis Sahib'.
[SoundCloud] [Track] 'By Design: Thesis Sahib produced by Middle Sex Wrestling Team'.
[SoundCloud] [Track] 'Every Last Word'.
[SoundCloud] [Track] 'What are the chances circuit bent sound sculpture 2010'.
[SoundCloud] [Tracks in queue] '21'.
[SoundCloud] [Connected] : 'thesis sahib'.
Ink Or Paint : Thesis Sahib
Duration : 2m:54s
Likes count : 0
Permalink : https://soundcloud.com/thesis-sahib/04-ink-or-paint
License : all-rights-reserved
Audio Stream : 128 kbit/s, 44100 Hz
MPEG Layer : III, w/o CRC
Mode : joint (MS/intensity) stereo, no emphasis
2 Ch, 44.1 KHz, 16:s:b
0% 10 20 30 40 50 60 70 80 90 100%
0s |----|----|----|----|----|----|----|----|----|----| 2m:54s
04s
Spotify Test - It seems like it loads information don’t have a premium account to test further.
tizonia --spotify-artist 'enya'
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[Spotify] [Connecting] : 'nonasuomy'.
INFO:root:
INFO:root:_remove_explicit_tracks : DISALLOW - tracks before 0
INFO:root:arg : enya
[Spotify] [Artist search] 'enya'.
DEBUG:urllib3.connectionpool:Starting new HTTPS connection (1): accounts.spotify.com:443
DEBUG:urllib3.connectionpool:https://accounts.spotify.com:443 "POST /api/token HTTP/1.1" 200 None
More stuff...
[Spotify] [Cache]: '/var/tmp/tizonia-nonasuomy-spotify-nonasuomy'
[Spotify] [FATAL] Login attempt failed. Bad user name or password.
tizonia exiting (OMX_ErrorInsufficientResources).
[OMX.Aratelia.audio_source.spotify.pcm:port:0]
[OMX_ErrorInsufficientResources]
YouTube Test - Python Error!
tizonia --youtube-audio-stream v2AC41dglnM
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[Youtube] [Connecting] : 'v2AC41dglnM'.
Traceback (most recent call last):
File "<string>", line 4, in <module>
ValueError
Python modules 'pafy', 'youtube-dl', 'joblib' or 'fuzzywuzzy' not found.
Please make sure these are installed correctly.
tizonia exiting (OMX_ErrorInsufficientResources).
[OMX.Aratelia.audio_source.http:port:0]
[OMX_ErrorInsufficientResources]
TuneIn Test - Python Error!
tizonia --tunein-trending 'heart UK'
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
Traceback (most recent call last):
File "<string>", line 4, in <module>
ValueError
Python modules 'joblib' or 'fuzzywuzzy' not found.
Please make sure these are installed correctly.
tizonia exiting (OMX_ErrorInsufficientResources).
[OMX.Aratelia.audio_source.http:port:0]
[OMX_ErrorInsufficientResources]
Check if installed…
python -c "help('modules');" | grep pafy
_multiprocessing decimal pafy tizplexproxy
python -c "help('modules');" | grep fuzzywuzzy
_strptime fuzzywuzzy pychromecast warnings
python -c "help('modules');"
Please wait a moment while I gather a list of all available modules...
Cryptodome antigravity imaplib setuptools
Levenshtein appdirs imghdr shelve
__future__ argparse imp shlex
_abc array importlib shutil
_ast ast inspect signal
_asyncio asynchat io simplejson
_bisect asyncio ipaddress site
_blake2 asyncore itertools six
_bootlocale atexit json smtpd
_bz2 audioop keyword smtplib
_codecs base64 lib2to3 sndhdr
_codecs_cn bdb libmount socket
_codecs_hk binascii libxml2 socketserver
_codecs_iso2022 binhex libxml2mod soundcloud
_codecs_jp bisect linecache soupsieve
_codecs_kr bs4 locale spotipy
_codecs_tw builtins logging spwd
_collections bz2 lxml sqlite3
_collections_abc cProfile lzma sre_compile
_compat_pickle calendar mailbox sre_constants
_compression cgi mailcap sre_parse
_contextvars cgitb marshal ssl
_crypt chardet math stat
_csv chunk mechanicalsoup statistics
_ctypes cmath mimetypes string
_ctypes_test cmd mmap stringprep
_curses code mock struct
_curses_panel codecs modulefinder subprocess
_datetime codeop monotonic sunau
_dbm collections multiprocessing symbol
_decimal colorsys mutagen symtable
_dummy_thread compileall netifaces sys
_elementtree concurrent netrc sysconfig
_functools configparser nis syslog
_gdbm contextlib nntplib tabnanny
_hashlib contextvars ntpath tarfile
_heapq copy nturl2path telnetlib
_imp copyreg numbers tempfile
_io crypt oauth2client termios
_json csv opcode textwrap
_locale ctypes operator this
_lsprof curses optparse threading
_lzma dataclasses ordered_set time
_markupbase datetime os timeit
_md5 dateutil ossaudiodev tizchromecastproxy
_multibytecodec dbm packaging tizgmusicproxy
_multiprocessing decimal pafy tizplexproxy
_opcode decorator parser tizsoundcloudproxy
_operator difflib pathlib tizspotifyproxy
_osx_support dis pbr tiztuneinproxy
_pickle distutils pdb tizyoutubeproxy
_posixshmem dns pickle tkinter
_posixsubprocess doctest pickletools token
_py_abc drv_libxml2 pipes tokenize
_pydecimal dummy_threading pkg_resources tqdm
_pyio easy_install pkgutil trace
_queue email platform traceback
_random encodings plexapi tracemalloc
_sha1 ensurepip plistlib tty
_sha256 enum poplib turtle
_sha3 errno posix turtledemo
_sha512 eventlet posixpath types
_signal faulthandler pprint typing
_sitebuiltins fcntl proboscis unicodedata
_socket filecmp profile unittest
_sqlite3 fileinput pstats urllib
_sre fnmatch pty urllib3
_ssl formatter pwd uu
_stat fractions py_compile uuid
_statistics ftplib pyasn1 validictory
_string functools pyasn1_modules venv
_strptime fuzzywuzzy pychromecast warnings
_struct gc pyclbr wave
_symtable genericpath pydoc weakref
_sysconfigdata__linux_x86_64-linux-gnu getopt pydoc_data webbrowser
_testbuffer getpass pyexpat websocket
_testcapi gettext pyparsing wsgiref
_testimportmultiple glob queue xcbgen
_testinternalcapi gmusicapi quopri xdrlib
_testmultiphase gpsoauth random xml
_thread greenlet re xmlrpc
_threading_local grp readline xxlimited
_tkinter gzip reprlib xxsubtype
_tracemalloc hashlib requests youtube_dl
_uuid heapq resource zeroconf
_warnings hmac rlcompleter zipapp
_weakref html rsa zipfile
_weakrefset http runpy zipimport
_xxsubinterpreters httplib2 sched zlib
_xxtestfuzz idlelib secrets
abc idna select
aifc ifaddr selectors
Enter any module name to get more help. Or, type "modules spam" to search
for modules whose name or summary contains the string "spam".
Fixed errors above via pip upgrade.
sudo easy_install pip
sudo -H pip install --upgrade wheel gmusicapi soundcloud youtube-dl pafy pycountry titlecase pychromecast fuzzywuzzy eventlet
This upgrade errors excluded above:
sudo -H pip install --upgrade plexapi
Collecting plexapi
Using cached PlexAPI-3.6.0.tar.gz (87 kB)
Requirement already satisfied, skipping upgrade: requests in /usr/lib/python3.8/site-packages (from plexapi) (2.23.0)
Requirement already satisfied, skipping upgrade: chardet>=3.0.2 in /usr/lib/python3.8/site-packages (from requests->plexapi) (3.0.4)
Requirement already satisfied, skipping upgrade: idna>=2.5 in /usr/lib/python3.8/site-packages (from requests->plexapi) (2.9)
Requirement already satisfied, skipping upgrade: urllib3>=1.21.1 in /usr/lib/python3.8/site-packages (from requests->plexapi) (1.25.9)
Building wheels for collected packages: plexapi
Building wheel for plexapi (setup.py) ... done
Created wheel for plexapi: filename=PlexAPI-3.6.0-py3-none-any.whl size=99232 sha256=653f600a8739943356731e98c9d8ec3d836b61ab24d24f112806ffbaa60532cd
Stored in directory: /root/.cache/pip/wheels/9e/1c/43/3477665e2761b6ebda046f86624043ef241a89980798718b64
Successfully built plexapi
Installing collected packages: plexapi
Attempting uninstall: plexapi
Found existing installation: PlexAPI 3.4.0
ERROR: Cannot uninstall 'PlexAPI'. It is a distutils installed project and thus we cannot accurately determine which files belong to it which would lead to only a partial uninstall.
Grab plexapi from AUR:
yay -Sy python-plexapi
After update pip will say it is now the current version.
sudo -H pip install --upgrade plexapi
Requirement already up-to-date: plexapi in /usr/lib/python3.8/site-packages (3.6.0)
YouTube Test - Working!
tizonia --youtube-audio-stream v2AC41dglnM
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[Youtube] [Connecting] : 'v2AC41dglnM'.
[YouTube] [Audio strean] : 'v2AC41dglnM'.
[YouTube] [Stream] 'AC/DC - Thunderstruck (Official Video)' [webm].
[YouTube] [Stream] 'AC/DC - Thunderstruck (Official Video)'.
[YouTube] [Streams in queue] '1'.
[Youtube] [Connected] : 'v2AC41dglnM'.
acdcVEVO : AC/DC - Thunderstruck (Official Video)
Stream # : 1 of 1
YouTube Id : v2AC41dglnM
Duration : 04m:52s
File Format : webm
Bitrate : 160k
Size : 4 MiB
View Count : 729691664
Description : Official music video for “Thunderstruck” by AC/DCListen to AC/DC: https://ACDC.lnk.to/listenYD Subscribe to A
Published : 2012-11-07 15:15:10Z
Opus Stream : 2 Ch, 48000 Hz
2 Ch, 48 KHz, 16:s:l
0% 10 20 30 40 50 60 70 80 90 100%
0s |----|----|----|----|----|----|----|----|----|----| 4m:52s
1m:14s
TuneIn Test - Working!
tizonia --tunein-trending 'heart UK'
tizonia 0.21.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[TuneIn] [TuneIn 'trending' category search] : 'heart UK'.
[TuneIn] [trending] Filtering results: 'heart UK'.
[TuneIn] [station] 'BBC Radio 4' [Best of Today] (mp3, 128kbps, reliability: 97%).
[TuneIn] [station] 'RTÉ Radio 1' [RTÉ Radio 1 features News...] (mp3, 96kbps, reliability: 97%).
[TuneIn] [station] 'LBC London' [Nick Ferrari - The Whole Show] (mp3, 128kbps, reliability: 97%).
[TuneIn] [station] 'BBC Radio 2' [The Zoe Ball Breakfast Show] (mp3, 128kbps, reliability: 99%).
[TuneIn] [station] 'Today FM' [The Ian Dempsey Breakfast Show] (mp3, 96kbps, reliability: 100%).
[TuneIn] [station] 'Newstalk' [Highlights from Newstalk Breakfast] (mp3, 96kbps, reliability: 100%).
[TuneIn] [station] 'Joy FM' [Joy FM News] (mp3, 96kbps, reliability: 98%).
[TuneIn] [station] 'talkSPORT' [What Real Sport Sounds Like] (mp3, 32kbps, reliability: 99%).
[TuneIn] [station] 'BBC Radio 5 live' [5 Live Breakfast] (mp3, 128kbps, reliability: 100%).
[TuneIn] [station] 'BBC Radio 6 Music' [Chris Hawkins] (mp3, 128kbps, reliability: 96%).
[TuneIn] [station] 'BBC World Service News' [Newsday] (mp3, 48kbps, reliability: 90%).
[TuneIn] [station] 'Lincs FM' [Joseph Begley] (mp3, 32kbps, reliability: 87%).
[TuneIn] [station] 'BBC Radio 1' [Radio 1 Breakfast Best Bits with Greg James] (mp3, 128kbps, reliability: 97%).
[TuneIn] [station] 'Citi FM' [Citi Breakfast News] (mp3, 64kbps, reliability: 94%).
[TuneIn] [station] 'RTÉ 2fm' [Music, gossip, pop...] (mp3, 96kbps, reliability: 87%).
[TuneIn] [station] 'triple j' [Alex Lahey - You Don't Think You Like People Like Me] (mp3, 96kbps, reliability: 94%).
[TuneIn] [station] 'Radio National' [ABC News (Australia)] (mp3, 64kbps, reliability: 95%).
[TuneIn] [station] 'ABC NewsRadio' [ABC News Radio] (mp3, 96kbps, reliability: 53%).
[TuneIn] [station] 'Neat 100.9 FM' [Neat FM] (mp3, 64kbps, reliability: 99%).
[TuneIn] [station] 'ABC Radio Melbourne' [Drive (ABC Melbourne)] (mp3, 64kbps, reliability: 93%).
[TuneIn] [station] 'Radio Essex' [Cardi B / Bruno Mars - Please Me] (mp3, 160kbps, reliability: 77%).
[TuneIn] [station] 'Jazz24 - KNKX-HD2' [World Class Jazz] (mp3, 128kbps, reliability: 98%).
[TuneIn] [station] 'WBUR-FM' [BBC News] (mp3, 48kbps, reliability: 97%).
[TuneIn] [station] 'RTÉ Lyric FM' [RTÉ lyric fm is largely...] (mp3, 96kbps, reliability: 90%).
[TuneIn] [station] 'Classic Hits Ireland' [PJ and Jim] (mp3, 128kbps, reliability: 98%).
[TuneIn] [station] 'CLASSIC FM 97.3' [The station that plays every song you know] (mp3, 192kbps, reliability: 94%).
[TuneIn] [station] 'WWOZ' [Contemporary Jazz] (mp3, 128kbps, reliability: 98%).
[TuneIn] [station] '100hitz - Hot Hitz' [Kelly Clarkson - I Dare You] (mp3, 128kbps, reliability: 88%).
[TuneIn] [station] 'WAMU' [We're live, we're local, and we're Washington's NPR station.] (mp3, 32kbps, reliability: 66%).
[TuneIn] [Items in queue] '29'.
[TuneIn] Playing 'BBC Radio 4'.
[Tunein] [Connecting] : ''.
[Tunein] [Connected] : 'trending'.
Station : BBC Radio 4
Item # : 1 of 29
Description : Best of Today
Type : station
Format : mp3
Bitrate : 128
Reliability : 97
Streaming URL : http://bbcmedia.ic.llnwd.net/stream/bbcmedia_radio4fm_mf_p?s=1589429391&e=1589443791&h=9d51d27f0c08045ca14d4587
Thumbnail URL : http://cdn-radiotime-logos.tunein.com/s25419q.png
2 Ch, 44.1 KHz, 16:s:b
2 Ch, 48 KHz, 16:s:b
Development Branch
Warning remove prior builds otherwise compile will fail.
yay -R tizonia-all-git
cd ~/code
mkdir tizoniadev
git clone --single-branch --branch develop https://github.com/tizonia/tizonia-openmax-il
cd tizonia-openmax-il
export SAMUFLAGS=-j4
CFLAGS='-O2 -s -DNDEBUG'
CXXFLAGS='-O2 -s -DNDEBUG -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security'
Dependencies.
yay -Sy log4c
yay -Sy libspotify
yay -Sy python-pafy
yay -Sy python-gmusicapi
yay -Sy python-pychromecast-git
yay -Sy python-plexapi
yay -Sy fuzzywuzzy
yay -Sy spotipy
sudo pacman -Sy git boost check meson samurai libmad taglib mediainfo sdl sqlite lame faad2 libcurl-gnutils libvpx mpg123 opusfile libfishsound liboggz youtube-dl libpulse boost-libs hicolor-icon-theme python-eventlet python-levenshtein --ignore=fakeroot
Compile.
arch-meson build
samu -v -C build
sudo samu -C build install
iHeart Testing - Working!
tizonia --iheart-search trance
tizonia 0.22.0. Copyright (C) 2020 Juan A. Rubio and contributors
This software is part of the Tizonia project <https://tizonia.org>
[iHeart] [iHeart search] : 'trance'.
[iHeart] [station] [#1] 'Trancid' [Non-stop Trance and Progressive 24/7] (Digital, states/US-NAT).
[iHeart] [Stations in queue] '1'.
[iHeart] [Streaming] : 'trance'.
Station : Trancid (1 of 1)
Description : Non-stop Trance and Progressive 24/7
City : Digital
State : states/US-NAT
Encoding : audio/aac
Website : www.trancidradio.com
Streaming URL : https://stream.revma.ihrhls.com/zc5144
Thumbnail URL : http://i.iheart.com/v3/re/assets/images/5144.png
2 Ch, 44.1 KHz, 16:s:l
Woo hoo!
Good luck.
Note: Directions should generally be the same for all other WSL distros with the change-up of package managers and package names.
Written on August 13, 2020